Products Catalog
QC-CLEAN 101 (Degreaser)
Concentrated, water-soluble, biodegradable ,liquid degreaser. The unique formulation is especially suitable for cleaning and removing oils, fats and grease from a wide variety of surfaces. In all areas of industry it’s effective in loosening, lifting and suspending all types of greasy residues.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Alkaline, Emulsion
: Water
: Dilution with water
: Oil, Fat, Grease, Carbon, Oxidation, Dust
: No waterproof grease soil
: Metal, Aluminium or Zinc Alloy
: After dilution with water, it can be applied by using rag, brush, sprayer Or used in dipping tank.
QC–CLEAN 103 (Oil Spill Dispersant)
QC-CLEAN 103 Oil Spill Dispersant is a concentrated, water-soluble, biodegradable ,liquid dispersant. The unique formulation is especially suitable for breaking up and neutralizing crude and refined oil products. It’s effective in loosening, lifting and suspending all types of greasy residues.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Alkaline, Emulsion & Dispersants
: Water
: Dilution with water
: Oil, Fat, Grease, Carbon, Oxidation, Dust/ Fly ash, Asphalt
: No waterproof grease soil
: Metal, Aluminium or Zinc Alloy
: After dilution with water, it can be applied by using rag, brush, sprayer or used in dipping tank.
QC–CLEAN–BB-8 (Heavy Duty Alkaline Cleaner)
QC-CLEAN BB-8 is a concentrated liquid blend of Sodium Hydroxide, Surfactant and Chelan , water-soluble. The unique formulation is especially suitable for breaking up and neutralizing crude and refined oil products It’s effective in loosening, lifting and suspending all types of greasy residues.The Products is effective to swelling mud’s , removal of hardness scale and others minerals deposit from the equipment
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Alkaline, Emulsion & Dispersants
: Water
: Dilution with water
: Mud’s , Crud Oil, Grease, Carbon, Oxidation, Dust/ Fly ash, Asphalt
: No waterproof grease soil
: Metal, Aluminium or Zinc Alloy
: After dilution with water, it can be applied by using rag, brush, sprayer or used in dipping tank. it’s effective apply at up 40C
QC-CLEAN BA16 (Acid Scale Remover)
QC-CLEAN C202 is a liquid acid scale remover that is formulated for fast, effective removal of hardness scale, rust and other mineral deposits from heat exchangers, condensers, cooling jackets, process vessels, piping, valves and other equipment subject to scale deposits.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: QC-CLEAN BA16
: Acid with rust Inhibitor
: Water, non flammable
: Dilution with water
: Scale, rust and deposit mineral
: All surfaces that cleaned with water
: Stainless steel, aluminium, zinc, galvanize. It can damage if contact with QC-CLEAN C202 for the long time.
: After dilution with water, this product can be circulated in a closed system. Dipping can be done with heating until 60 deg C
QC-CLEAN P201 (Rust Remover)
A liquid blend of phosphoric acid and detergents for the rapid removal of rust, oxidation and stains from ferric metals, concrete, ceramic tile and painted surfaces. Diluted 1 : 12, QC-Clean P201 is effective cleaning uncured concrete from mix truck exteriors. Used diluted, QC-Clean P201 may be applied as a foam, in a hot or cold dip tank or manually, dilute 1 : 5 – 1 : 100 depending upon nature and degree of soil maximum solution temperature 150°F.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Acid & Detergent
: Water
: Dilution with water
: Oil, Rust, Oxidation
: All surfaces can clean with water
: Marmer, Granite, Zinc, Aluminium
: Dilute 1 : 5 until 1 : 100 with water, depending on the type of soils And it can be done with rag, paint brush, or sprayer.
QC-CLEAN–SF-88 (Close Cooling Scale Remover)
QC-CLEAN –BA-16 is a concentrated liquid blend of Phosphoric acid , Sulfamic Acid, catalyst and corrosion inhibitor dispersant and foaming surfactant and corrosion inhibitor. The unique formulation is for fast, effective removal of hardness scale, rust and other mineral deposits from heat exchangers, condensers, cooling jackets, process vessels, piping, valves and other equipment subject to scale deposits.Used in hot tanks, tunnel or bath washer is dilute 1 – 25 of water depending upon the nature and degree of soil. Optimum temperature 80C.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: QC-CLEAN–SF-88
: Acid
: Water Base
: Dilution with water
: Scale, rust and deposit mineral
: All surfaces that cleaned with water
: Aluminium, zinc, galvanize
: Use without dilution apply with rag, sprayer or circulating system
QC-CLEAN–S301 (Electric Cleaner)
QC-CLEAN –S301 is a high dielectric strength ready-to-use solvent, designed to replace 1.1. CFC’ and Chlorinated solvents. Use undiluted as a coarse spray, wipe on/wipe off or in a dipping tank. QC-CLEAN –S301 dries within 20-30 minutes allowing time for solvent cleaning action.
QC-CLEAN –S301 is recommended for cleaning electric motors,, MCB and other electrical equipment and cleaning shaft bearing, bearing housing, chassis of mobile equipment and gearbox for the rapid removal of grease, oil, solvent base ink and wax.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: QC-CLEAN–S301
: Solvent
: Petroleum distillated (Hydrocarbon Base)
: Ready. To use
: Fat, oil, ink , Grease, wax or others soil on the electric equipment
: All of metal surfaces
: Latex, plastic & vinyl surface
: Use without dilution apply with rag, sprayer or brush.
QC-CLEAN–S302 (Electric Cleaner)
QC-CLEAN –S302 is a ready-to-use solvent, based on Chlorinated Solvent .
Use undiluted as a coarse spray, wipe on/wipe off or in a dip tank, QC -CLEAN –S302 dries with 3 – 5 minutes allowing time for solvent cleaning action.
QC-CLEAN –S302 is recommended for cleaning electric motors, turbine, card and other electrical / Instrumentation equipment and for the rapid removal of grease, oil, solvent base ink and wax.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Solvent
: Three Chloride ethane (TCE- Base)
: Ready to use
: Fat, waterproof grease, wax or others soil on the electric equipment
: Rubber or others seals
: All of metal surfaces
QC-CLEAN S303 ( SOLVENT DEGREASER)
QC -CLEAN S303 is modern solvent for replacement “chlorinated solvent – CFC’s and others ozon hazardous solvent cleaner . QC -CLEAN S303 although somewhat slower drying than chlorinated solvent, provides longer contact with soil and superior penetration, resulting in more thorough cleaning using less cleaner .
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: QC-CLEAN S303
: SOLVENT DEGREASER
: Aliphatic hydrocarbon
: Ready to use
: Wax, Glue, Grease, Oil, Fat, ink ect . on the electric equipment
: All of metals surfaces
: Rubber or others seals
: Use with sprayer, wiping or dipping. No rinse required
QC-CLEAN S304 (MOULD CLEANER and PAINT REMOVER)
QC-CLEAN 304 , Mould Cleaner and Paint Remover, is solvent product based on “Paint Solvent” and Non water soluble . The unique formulation QC-CLEAN 304 is recommended to cleaning up & remove the paint spot/ soiled , rubber deposit . use undiluted in dip tanks or apply as spray, with brush or swab
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Mould Cleaner and Paint Remover
: Petroleum distillate
: Ready to use
: Paint spot/ soiled , Rubber deposit and Plastic moulding
: All of metals surfaces and concrete
:
: undiluted in dip tanks or apply as spray, or with brush or swab
RP-102 ( IN DOOR – RUST PROTECTION)
RP-102 dries to a transparent non-tacky film which provides up to 2 years indoor corrosion prevention. Safe to use-on all metals, RP-102 meets the corrosion and water displacement
RP-102 is recommended for indoor rust protection of machinery, tools, bearings, part and other unpainted metals after they have been cleaned. Apply undiluted by spray, brush or immersion. RP-102 is easily removed by conventional metal cleaning procedures.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Rust inhibitor for metal
: Petroleum distillate
: Ready to use
:
: All of metals surfaces
:
: Use with sprayer, wiping or dipping. Rust inhibitor 2 years for indoor storage.
RPV (OUT DOOR RUST PROTECTION)
RPV Is the viscous solvent based on minerals aliphatic which provides up to 2 years outdoor corrosion prevention. Safe to use-on all metals
RPV is recommended for outdoor rust protection of machinery, tools, bearings, part and other unpainted metals after they have been cleaned. Apply undiluted by brush. RPV is easily removed with QC -CLEAN S303 by conventional metal cleaning procedures.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Rust inhibitor for metal
: Aliphatic Mineral , Hydro treated Oil and Sulphonate Petroleum
: Ready to use
: All of metals surfaces
:
: Use with sprayer, wiping or dipping. Rust inhibitor 2 years for OUTDOOR storage.
QC-CLEAN–BB-26 (Heavy Duty Acid Cleaner)
QC-CLEAN –BB-26 is a concentrated liquid blend of Chloride and Nitric Acid, catalyst and corrosion inhibitor dispersant and foaming surfactant and corrosion inhibitor. The unique formulation is for fast, effective removal of hardness scale, rust and other mineral deposits from process vessels, piping works, and other equipment subject to scale deposits especially at the power plant which coal as the fuel .
Used in hot tanks, tunnel or bath washer is dilute 1 – 25 of water depending upon the nature and degree of soil.
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Acid
: Water Base
: Dilution with water
: Scale, rust and deposit mineral
: All surfaces that cleaned with water
: Stainless steel, aluminium, zinc, galvanize
: Use without dilution apply with rag, sprayer or circulating system
QC-CLEAN–FK-26 (Flocculants & Detergent’s De-activator)
QC-CLEAN –FK-26 is a concentrated liquid blend of Chloride Salt, catalyst. The unique formulation is for fast, effective to coagulated of detergent substance in the waste .
Used in the bath washer is dilute 1 – 25 of water depending upon of detergent concentration
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Acid
: Water Base
: Dilution with water
:
: All surfaces that cleaned with water
: Aluminium, zinc
: Use without circulating system
QC-CLEAN–ACI-26 (Fatty Acid Coagulants)
QC-CLEAN –BB-26 is a concentrated liquid blend of alum , polymer and catalyst. The unique formulation is for fast, effective coagulated fatty acid to form the fatty bounding
Used in hot tanks, tunnel or bath washer is dilute 1 – 25 of water depending on fatty acid concentration
Type of Formulation
Base of Formulation
Dilution
Remove of Soil
Safe for the Surfaces
Test before usage for Material
How to use
: Acid
: Water Base
: Dilution with water
:
: All surfaces that cleaned with water
: –
: circulating system